MOS² PENETRATING AEROSOL
HIGH PENETRATING POWER 24.2 dyne/cm
ULTRA-QUICK RELEASE ACTION
OPTIMUM RELEASE TORQUE (MIL A 907 E10) 40 N/m
VERY HIGHLY LUBRICANT, MoS² Super Fine Finest 2.5µ
SRV TEST 0.09, SHELL FOUR-BALL TEST IMPRINT 0.52, ICS 3100 DAN
REDUCES OPERATING NOISE, PREVENTS WEAR
DESCRIPTION
Product charged in MoS2, slightly fatty, strongly lubricant.
Guaranteed without silicone, nor acid orthophosphoric.
This product has decarbonizing functions.
It removes the gumming and eliminates light or heavy hydrocarbons.
It avoids flashing and does not resinify.
It is a neutral product, without base, neither acid, without oxidant,
nor reducer. Stable product having a remarkable surface tension.
It does not have unpleasant petroleum odor but a natural odor of pine.
It does not have photochemical reactivity and is nonirritating.
Steam pressure at maximum temperature of weak use.
Product water repellent (water drives out), it is usable on wet surfaces.
Compatible with all plastic materials and elastomers, it does not tackle
paintings. Its point of spontaneous combustion is high, since it is higher than 230°C.
It is of very great harmlessness with respect to the users.
APPLICATIONS
Bolt and screw manufacture, penstocks, needles.
Degumming of slides of machine tools.
Pivots, boulons.
Push-pull cables.
Electromechanical contacts.
Hinges
Guides.
Pillars.
Slides.
Telescopic aerials.
Supporting members (cleaning and surface redressing).
General maintenance.
Chain degreasing.
Elimination of greases calcined in the bearings.
INSTRUCTIONS FOR USE
Shake the can
Apply without excess
Aerosol used in all positions
PHYSICO-CHEMICAL PROPERTIES TYPICALS
|
PROPERTIES |
STANDARD |
VALUE |
UNITS |
|
Appearance |
Visual |
fluid |
- |
|
Colour |
Visual |
black |
- |
|
Odour |
Olfactory |
pine |
- |
|
Density at 25°C |
EN ISO 12185 |
790 |
kg/m3 |
|
Refraction index |
ISO 5661 |
nm |
- |
|
Freezing point |
ISO 3016 |
-45 |
°C |
|
Water solubility |
- |
0 |
% |
|
Kinematic viscosity at 40°C |
EN 3104 |
2.1 |
mm²/s |
|
Acid value |
EN 14104 |
mg KOH/g |
|
|
Iodine value |
EN 14111 |
nm |
g I2/100g |
|
Water content |
ISO 6296 |
ppm |
|
|
PERFORMANCE PROPERTIES AS A DEGREASING SOLVENT |
|||
|
PROPERTIES |
STANDARD |
VALUE |
UNITS |
|
KB index |
ASTM D1133 |
97 |
- |
|
Evaporation rate |
- |
70 |
min |
|
Surface tension at 20°C |
ISO 6295 |
24.2 |
Dyne/cm |
|
Breakdown voltage at 20°C |
EN 60156 / IEC 156 |
nm |
kV |
|
Copper blade corrosion, 100 h at 40°C |
ISO 2160 |
1a |
Class |
|
PERFORMANCE PROPERTIES AS A LUBRICANT |
|||
|
PROPERTIES |
STANDARD |
VALUE |
UNITS |
|
SRV friction test |
ASTM D5707 |
0.09 |
Coefficient |
|
Shell four-ball test Imprint diameter |
IP 239 ASTM D2596 |
0.52
|
mm |
|
Shell four-ball test ICS weld point |
IP 239 ASTM D2596 |
3100 |
daN |
|
Potential noise reduction |
GRW method |
-45 |
dB |
|
Stamping test - Erichsen |
ISO 20482 |
80 |
N |
|
FIRE SAFETY PROPERTIES |
|||
|
PROPERTIES |
STANDARD |
VALUE |
UNITS |
|
Flash point (closed cup) |
ISO 2719 |
>65 |
°C |
|
Autoignition temperature |
ASTM E659 |
250 |
°C |
|
Lower explosive limit |
EN 1839 |
1 |
% (volume) |
|
Upper explosive limit |
EN 1839 |
7 |
% (volume) |
|
TOXICOLOGICAL PROPERTIES |
|||
|
PROPERTIES |
STANDARD |
VALUE |
UNITS |
|
Anisidine value |
ISO 6885 |
0 |
- |
|
Peroxide value |
ISO 3960 |
0 |
meq(O2)/kg |
|
TOTOX (anisidine index +2× peroxide index) |
- |
0 |
- |
|
Content of CMR, irritant and corrosive substances |
CLP regulation |
0 |
% |
|
Content of residual methanol derived from transesterification processes |
GC-MS |
0 |
% |
|
Aldehyde content |
GC-MS |
0 |
ppm |
|
ENVIRONMENTAL CHARACTERISTICS |
|||
|
PROPERTY |
STANDARD |
VALUE |
UNITS |
|
Water hazard |
WGK Germany |
1 |
Class |
|
Bioaccumulation Partition index (n-octanol/water) |
OCDE 107 |
<3 |
log KOW |
|
Vapour pressure at 20°C |
EN 13016 |
0.25 |
hPa |
|
Benzene content |
ASTM D6229 |
0 |
% |
|
Total halogen content |
Bomb calorimeter GC MS |
0 |
ppm |
|
Chlorinated solvent content |
- |
0 |
|
|
Aromatic solvent content |
- |
0 |
|
|
Content of substances hazardous to the environment |
CLP regulation |
0 |
% |
|
Content of compounds with non-zero GWP |
- |
0 |
% |
|
Content of compounds with non-zero ODP |
- |
0 |
% |
|
Carbon balance, life cycle analysis. |
ISO 14040 |
6.43 |
Kg, carbon equivalent |
PRESENTATION
|
|
Aerosol 650 ml
|
Looking for another product?
|
Discover our entire range by clicking on the photo |
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 